Debugging Connection with stm32F4 problem

Feb 27, 2013 at 10:21 AM
I have the stm32f4 discovery running with the firmware and netmf.
deploy of a projects works fine.

after the project is deployed and started,
the debug connection with VS2010 is lost.
while the new program runs.

try to change some settings in VS2010 but no luck yet.
also it takes an awfull long time after deploy, the whole thing starts.

__Also are there any new compiled binaries for this board.
the zip file is of august.__
Mar 14, 2013 at 2:53 AM
Hi,

Have you solved this issue?
If you solved, please let me know.
I face the same as issue. I suspect my OS (Windows 7 x64) causes the problem...

BR,
Mar 19, 2013 at 3:35 PM
Hi,

i used the wrong pin numbers, this lets the thing hang.
also with x64 bit you need a newest driver.

with the I2C issue its the pullup resistors.
now it runs real nice.

thanks
Johan

On 14-3-2013 3:53, kotetsuy wrote:

From: kotetsuy

Hi,

Have you solved this issue?
If you solved, please let me know.
I face the same as issue. I suspect my OS (Windows 7 x64) causes the problem...

BR,
Hi
Mar 19, 2013 at 3:42 PM
Also you should try a project with minimal code,
for example only debug.print() to test.





On 14-3-2013 3:53, kotetsuy wrote:

From: kotetsuy

Hi,

Have you solved this issue?
If you solved, please let me know.
I face the same as issue. I suspect my OS (Windows 7 x64) causes the problem...

BR,