It would be great if you could add support for the native IFU (In-Field Update) of the STM32 F4 like GHI Electronics did this in premium boards.
PS
IFU makes this mcu serious usable for product...
Id #12 | Release:
None
| Updated: Fri at 12:39 PM by dariog | Created: Apr 14 at 9:38 PM by dariog
It would be great if you could add support for the hardware watchdog of the STM32 F4. Hardware watchdog makes this mcu serious usable for production with .net micro framework.
PS
I'm planning us...
Id #11 | Release:
None
| Updated: Apr 30 at 5:04 PM by kevindwolf | Created: Apr 14 at 9:34 PM by dariog
The USB driver seems not to work for Win8. Is there a workaround to get it running? The driver is not signed, so I installed it in extended boot mechanism. It was installed well. Plugging in the Di...
Id #10 | Release:
None
| Updated: Feb 16 at 9:32 PM by StanDeMan | Created: Feb 16 at 9:32 PM by StanDeMan
It would be great if you could add support for the CAN interfaces of the STM32 F4.
Id #9 | Release:
None
| Updated: Apr 10 at 8:55 AM by dariog | Created: Dec 16, 2012 at 9:46 AM by tibel
are messed up.
as mentioned in the discussion:
it looks like the spi clock edge is messed up.
on spi1 it just works if its false (wich my chip dont likes)
on spi3 its looks like its inverse...
Id #5 | Release:
None
| Updated: May 8 at 9:17 PM by dariog | Created: Oct 19, 2012 at 8:34 PM by MichiM
I have tried running code that uses I2C to interface to a BMP085 pressure sensor.
It works perfectly with NETMF 4.1 on a Fez Panda.
It gives incorrect values and/or fails on STM32F4.
It seems ...
Id #2 | Release:
Beta 1 Release
| Updated: Jun 15, 2012 at 5:20 PM by sbishop61 | Created: May 14, 2012 at 11:08 PM by sbishop61